Taper-Lock Bushing

Taper-Lock bushings have a 4-digit size code: the first two digits indicate max bore size (e.g., 1.0" for "10"), and the last two digits show the bushing length (e.g., 0.8" for "08"). Inch bores use whole inches with fractions (e.g., 1-1/2"), while metric bores are marked with "MM" (e.g., X 25MM). Made of steel with an 8° taper and black oxide coating, these bushings are easy to install and remove. They fit flush into sprockets or pulleys, gripping shafts securely via inward wedging.