Click to enlarge
2012 Taper Lock Bushings
The Taper-Lock bushing size is defiined by 4 digits representing two numbers. The first two digits represent the maximum bore size and the second two digits represent the bushing length. For example, product number 1008 has a max bore of 1.0" and a total length of 0.8"
Inch bore sizes are designated with the whole inch followed by the fraction. For example a 1.5" diameter bore would be 1-1/2. Metric bore sizes are designated with "MM" after the metric dimension (X 25MM). These bushings are easy to install and remove, these bushings fit flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings have an 8° taper, are made of steel and come with a black oxide coating.
Inch bore sizes are designated with the whole inch followed by the fraction. For example a 1.5" diameter bore would be 1-1/2. Metric bore sizes are designated with "MM" after the metric dimension (X 25MM). These bushings are easy to install and remove, these bushings fit flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings have an 8° taper, are made of steel and come with a black oxide coating.
Category Files